Model KM3011 is an “IN LINE” stripper crimper so stripping and crimping operations are made without moving the wire so to guarantee a high stability of the process.
The machine is equipped with basic processing programs, with the possibility to store some personalized setups for special process.The machine can also run in “out hindrance” mode that means to strip the wire out of the miniapplicator hindrance. All machine information and settings are managed by comfortable touch-screen display.
The machine is equipped by a blade retraction device for a safer cable stripping.
KM3011 has been realized with a really compact wire gripper in order to make more approachable the front working area. The safety guard has more practical working window.
As standard feature, KM3011 is equipped with fine adjusting , quick-change clamping system, carrier strip chopper device and scrap vacuum system and lighting of the working area.
On request, the machine can be equipped with crimp force monitoring, bad crimping cutter device and special double stripping blades.

Crimping force 20kN (2 ton)
Power supply 230V – 50/60 Hz
Compressed air supply 6 bar – 100NL/min
Power consumption 1,4 Kw (6,3A)
Noise level < 80Db(A) Standard stroke 40 mm Lower dead center min 132 - max 137 mm Wire cross-section up to 4 mmq stripper + crimper (AWG 12) - up to 6 mmq. (AWG 10) only crimping Cycles/h min. 2200 Weight, kg 95 kg. Weight with packing 105 kg. Dimensions without coil holders mm 490 x 500 x 780 h Dimensions with packing mm 800 x 600 x 1040 h Minimum stripping length 1.8 (opt. from 1,0 to 9,2 mm with short stripping kit) Maximum stripping length 10 mm Minimum wire length 25 mm.

All data and measures are indicative and can be changed without notice. Certain types of extremely hard, tough wires may not be able to be processed even if written within the indicated ranges. In case of doubt, KM Corporate is willing to produce samples of your wire.


Download data sheet

Your Name (required)

Your Email (required)


Your message